M545D Hybrid Stepper Motor Driver
|1-9 10-49 50-99 100+|
|FOB Unit Price:||US $30 US $25 US $24.5 US $22.5|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: M545D
- Speed: Variable Speed
- Excitation Mode: HB-Hybrid
- Number of Poles: 2
- Type: Driving
- Brand: Jss
- Voltage Range: 24-48VDC
- Dimension: 117mm*71mm*35mm
- Suitable Stepper Motor: NEMA 23/34 Stepper Motor
- Transport Package: 25PCS/Carton
- Origin: Changzhou Jiangsu
- Application: CNC
- Number of Stator: Two-Phase
- Function: Driving
- Operate Mode: 2 Phase
- Certification: ISO9001, Ce
- Current Range: 1.5-4.5A
- Subdivision: 2-256
- Weight: 0.3kg
- Control Mode: Differential
- Specification: CE
- HS Code: 850300
M545D hybrid stepper motor driver
The M545D is a new generation microstep stepper motor driver. Due to the adoption of the advanced bipolar constant-current chopper driver technology, it shows stable operation, provides excellent high torque. Moreover, it significantly reduces the noises and vibration of the operating motor. The M545D has the feature of low-noise, low-vibration and low-heating. The M545D is DC24-50V power supply. It applies to 2-phase hybrid stepper motor under 4.5A current The M545D has 14l kinds of microsteps. The maximum step number is 51200 steps/rev (microstep is 1/256). The peak operating current ranges from 1.5A to 4.5A., and the output current has 8 stalls. The M545D has automatic semi-flow, motor misconnected,over-voltage, under-voltage, and over-current protection functions.
It can be applied in a variety of small scale automation equipment and instruments, such as labeling machine, cutting machine, packing machine, drawing machine, engraving machine, CNC machine and so on. It always performs well when it is used in equipment which requires for low-vibration, low-noise, high-precision and high-velocity.
The red indicator is on.
|1. A short circuit of motor wires.||Inspect or change wires|
|2. The external voltage is over or low than the driver's working voltage.||Adjust the voltage to a reasonable rang|
|3. Unknown reason||Return the goods|
Driver functions descriptions
|Driver function||Operating instructions|
|Users can set the driver output current by SW1-SW3 three switches.|
The setting of the specific output current, please refer to the instructions of the driver panel figure.
|Users can set the driver Microstep by the SW5-SW8 four switches. The setting of the specific Microstep subdivision, please refer to the instructions of the driver panel figure.|
|Users can set the driver half flow function by SW4. "OFF" indicates the quiescent current is set to half of the dynamic current, that is to say, 0.5 seconds after the cessation of the pulse, current reduce to about half automatically. "ON" indicates the quiescent current and the dynamic current are the same. User can set SW4 to "OFF", in order to reduce motor and driver heating and improve reliability.|
|PUL+ and PUL- are the positive and negative side of control pulse signal; DIR+ and DIR- are the positive and negative side of direction signal; ENA+ and ENA- are the positive and negative side of enable signal.|
|A+ and A- are connected to a phase winding of motor; B+ and B- are connected to another phase winding of motor. If you need to backward, one of the phase windings can be reversed.|
|It uses DC power supply. Recommended operating voltage is 24VDC-48VDC, and power consumption should be greater than 100W.|
|There are two indicator lights. Power indicator is green. When the driver power on, the green light will always be lit. Fault indicator is red, when there is over-voltage or over-current fault, the red light will always be lit; after the driver fault is cleared, if re-power the red light will be off.|
|Driver dimensions:117×71×35mm, please refer to dimensions diagram. Please leave 10CM space for heat dissipation. During installation, it should be close to the metal cabinet for heat dissipation.|
Signal interface details:
The internal interface circuits of the driver are isolated by the opt coupler signals, R in the figure is an external current limiting resistor. The connection is differential. And it has a good anti-jamming performance.
Control signal and external interface:
|Signal amplitudes||External current limiting resistor R|
Packing and shipping :
Changzhou jinsanshi Mechatronics Co.Ltd. is a comorehensive company which specializes in producing and reserching stepper motor and motor driveer.In addition ,we have two brancher, Changzhou leicon Techonlogy Co. Ltd and Changzhou Dewo Interational trade Co. Ltd.
Welcome to contact us:
Terrific after-sales service: 24hours around the clock & 12 months Warranty
Life-long maintenance service for the product.
Our contact information: